Gearboxes

Логотип GSM - png

Industrial series gearboxes GSM:

.

.


rxp700Series Helical Gearboxes RXP-700

Slightly after the market introduction of the gearboxes RX 800 line, the parallel axis series RXP 700 is now ready to be launched as a natural complementary range, covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and options make it a strong and realiable product.

Ratio i: Min 3.3 – Max 334.9
Output torque (Nm): Min 200 – Max 1500
Power (kW): Min 0,31 – Max 43,1
Housing version: monoblock


rxp800High torque parallel gearboxes with long center distance RXP 800

The new range of universal parallel shaft gearboxes sets a new standard in the market, having adequate sizing which ensures constant and optimum reliability in the toughest working conditions. This range is an effective response to the power transmission needs of medium-heavy and heavy industry. To complete the range, we also made the same gearboxes with long center distance. The increased load capacity of cylindrical gears and bearings has reduced the size of gearboxes in the market, reducing the shaft center distance between input and output. With this new line of drives you are free to apply the electric motor and your application from the same side, without sacrificing the strength that has always set them apart.

Ratio i: Min 1,11 – Max 801
Output torque (Nm): Min 1400 – Max 692000
Power (kW): Min 0,72 – Max 9308
Housing version: collapsible (with a parting plane)


rxo700Universal bevel helical gearboxes RXO-700, RXV-700

Slightly after the market introduction of the gearboxes RX 800 line, the bevel helical series RX 700 is now ready to be launched as a natural complementary range covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and optionals make it a strong and realiable product.

 

Ratio i: Min 9,5 – Max 502,2
Output torque (Nm): Min 230 – Max 2100
Power (kW): Min 0,19 – Max 22,89
Housing version: monoblock

 


rxo800High torque bevel helical gearboxes RXO-800, RXV-800

The new range of bevel helical gearboxes sets a new standard in the market, having adequate sizing which ensures constant and optimum reliability in the toughest working conditions. This range is an effective response to the power transmission needs of medium-heavy and heavy industry. To complete the range, we also made the same gearboxes with very low ratios, leaving them free to be used in a wide range of applications.

Ratio i: Min 4,39 – Max 4839
Output torque (Nm): Min 1100 – Max 692000
Power (kW): Min 0,12 – Max 2312
Housing version: collapsible (with a parting plane)


rxpestExtruder gearboxes

RXP-EST-700, RXP-EST-800

This new gearbox series for single screw extruder control has consolidated the position of our company at the market top for transmittable moment torque. We can cover the extruder diameter screw from 30 mm to up 300 mm (from 220 mm on request).
RXP / EST is a machine intended to be very innovative by having screw front extraction and thrust hold bearing on flanged mounting.
In this way we can reach the highest integration between drive and extrusion leading to an unbeatable ratio quality/price.
As this sector is constantly evolving, our company is constantly researching and developing new solutions for the customers.

RXP-EST 700

Ratio i: Min 8, 7 – Max 58, 1
Output torque (Nm): Min 860 – Max 4872
Power (kW): Min 3,0 – Max 108,1
Thrust bearing (code): 29412E – Max 29415E
Housing version: collapsible (with a parting plane)

RXP-EST 800

Ratio i: Min 4,44 – Max 1/142
Output torque (Nm): Min 2900 – Max 86800
Power (kW): Min 4,1 – Max 2402
Thrust bearing (code): Min 29415E – Max 29452E
Housing version: collapsible (with a parting plane)


rxv1Extruder gearboxes

RXO-EST-700, RXV-EST-700, RXO-EST-800, RXV-EST-800

This new gearboxes series for single screw extruder control, has consolidated the position of our company as a market leader for transmittable moment torque. RXO-EST, RXV-EST is a machine intended to be very innovative by having screw front extraction and thrust hold bearing on flanged mounting. In this way we can reach the highest integration between drive and extrusion leading to unbeatable value for money. We can to cover the extruder diameter screw size from 30 mm to up 300 mm (from 220 mm on request). As this sector is continual evolution, our company is constantly researching and developing new solutions for the customers.

RXO-V-EST 700
Ratio i: Min 5,2 – Max 75,4
Output torque (Nm): Min 458 – Max 4600
Power (kW): Min 2,2 – Max 151,6
Thrust bearing (code): 29412E – Max 29415E
Housing version: collapsible (with a parting plane)

RXO-V-EST 800

Ratio i: Min 19.1 – Max 124
Output torque (Nm): Min 3200 – Max 86800
Power (kW): Min 4,8 – Max 661
Thrust bearing (code): Min 29415E – Max 29452E
Housing version: collapsible (with a parting plane)


rxpeLifting gearboxes RXP-E

RXP-E series for industrial lifting takes its origin from the standard RX to which has been given a secondary differential gearbox.
These gearboxes have input and output shafts with wide dimensions in order to fulfil the expectations of heavy mechanical producers of lift systems, giving an optimum relationship between performances and weight.
The planetary differential gearbox has a double input that can be found between the main motor and the lift gearbox, with the purpose to obtain two different speeds to the output low shaft.
While one motor is working, the other one is constantly braking.
The change of worm ratio inside the differential gearbox gives the opportunity of obtaining different output speeds, and so varying the relation between primary and secondary speeds.

Ratio i: Min 31,2 – Max 568
Output torque (Nm): Min 2700 – Max 177000
Power (kW): Min 1,1 – Max 613
Center distance (mm): Min 305 – Max 1090
Housing version: collapsible (with a parting plane)


RXO-TRCooling tower gearboxes RXO/TR

This gearbox series for cooling towers and/or pulp and paper mixers is especially built to grant reliability to customers. This is made possible through a generous upsizing of both gears and bearings as well as a balanced internal gear arrangement, so to offer optimization of uniformity in balancing loads inside the gearbox.
With the half casing the periodic inspection and maintenance purposes are facilitated, especially in places that are not easy to access.

Ratio i: Min 4,0 – Max 28,0
Output torque (Nm): Min 600 – Max 50125
Power (kW): Max 368
Radial long-term load on the output shaft (Nm): Max 17600
Axial long-term load on the output shaft (Nm): 82000
Housing version: collapsible (with a parting plane)


RXO2_818_C1D_ECE_ARSB_UB_M1_DT_PROT_O140_2_DX_PAM160_amb — (png)Bucket elevator gearboxes RXO-O 800

RXO-O series for bucket elevators takes its origin from the standard RX to which a secondary auxiliary gearbox is added to modify the transmission speed. As a result the gearbox will work at a primary speed for the standard operations and at a secondary speed (much slower) for positioning.

Main gearbox

Ratio i: Min 464,1- Max 545,4
Power (kW): Min 4,71 – Max 1114,44
Housing version: collapsible (with a parting plane)

Additional gearbox

Ratio i: Min 26,6 – Max 68,1
Output torque (Nm): Min 3300 – Max 334000
Power (kW): Min 8,8 – Max 1926
Housing version: collapsible (with a parting plane)


rxpmxMixer gearboxes RXP/MX 800

This gearbox series RXP/MX for mixers and/or aerators is especially intended to withstand high axial loads normally found in these types of machines through a couple of upsized taper roller bearings placed on a upsized support reducing the jolt of the application.
The cylindrical output shaft is available with key, with flange connection and with shrink disk.
The DRY-WELL device is also available and appreciated to eliminate possible oil leaks. .

Ratio i: Min 4,39 – Max 4839
Output torque (Nm): Min 1100 – Max 692000
Power (kW): Min 0,12 – Max 2312
Housing version: collapsible (with a parting plane)


rxmMining gearboxes RXMaster RXM

The RXMaster gearbox series has been specifically designed for conveyor drive applications where exceptional performances, improved bearing life and increased thermal capacity are primary objectives. The RXMaster series is enhanced by a high power-to weight ratio, where units can be modified to suit customer specific requirements. Excellence in conveyor drive operations.

Ratio i: Min 4,39 – Max 4839
Output torque (Nm): Min 1100 – Max 692000
Power (kW): Min 0,12 – Max 2312
Housing version: collapsible (with a parting plane)


ql Quick Locking QL

Quick Locking solution for easy and versatile mounting on driven shaft machine.
A wide range of bushing bore sizes are available for each type of reducer, interchangeable with easy dismounting.
The through hollow shaft, protected by removable cap, preserves the driven shaft from the atmospheric agents.
Perfect fit for today’s harsh duty industries such as mining, quarry and cement plants.
Available on bevel helical, parallel and shaft mounting gearbox ranges.
The best choice also for replacement or repair.


online-7Configurator for industrial gear GSM drawings (online)

Login: Industry

Password: 123456